If you have a fire or water emergency, please call us now at (508) 676-9100

To have the optimal experience while using this site, you will need to update your browser. You may want to try one of the following alternatives:

Fire & Water - Cleanup & Restoration

Fire Extinguisher after affect

4/27/2017 (Permalink)

The most versatile fire extinguisher type for home use is the dry chemical fire extinguisher, which is recommended for normal fires as well as grease fires and electrical fires. Unfortunately, dry chemical extinguishers come with a downside. When used, a dry chemical extinguisher coats the surrounding area in a layer of chemicals that, while great for smothering flames, makes a huge mess and can damage electronic equipment. With these instructions, you can minimize the mess and efficiently clean the chemicals from this type of fire extinguisher.

Fire extinguishers are generally looked upon as being a safety device, so not many people think about the potential dangers they hold. As with anything you bring into a home or workplace, it’s important to fully understand the devices used. While fire extinguisher powder is non-toxic, it is not entirely safe. The chemicals used are considered appropriate for home use, but you should take precautions to avoid touching or inhaling too much of the powder. After a fire, the residue left by a fire extinguisher needs to be cleaned up. Many areas do not permit phosphates or sulfates to be added to the water table. Since the vast majority of fire extinguishers contain ammonium phosphate and/or ammonium sulfate, you need to be careful about cleaning up. The chemicals can irritate skin, so use gloves and avoid inhaling by using a dust mask.

What To Do After A Fire

  • Limit movement in the home to prevent soot particles from being embedded into upholstery and carpets.
  • Keep hands clean so as not to further soil upholstery, walls and woodwork.
  • Place clean towels or old linens on rugs, upholstery and carpet traffic areas.
  • If electricity is off, empty freezer and refrigerator and prop doors open.
  • Clean and protect chrome with light coating of petroleum jelly or oil.
  • Wash houseplants on both sides of leaves.
  • Change HVAC filter.
  • Tape double layers of cheesecloth over air registers.

What NOT To Do After A Fire

  • Don't attempt to wash any walls or painted surfaces or shampoo carpet or upholstery without contacting us.
  • Don't attempt to clean any electrical appliances that may have been close to fire, heat or water without consulting an authorized repair service.
  • Don't use any canned or packaged food or beverages that may have been stored near the fire, heat or water.
  • Don't turn on ceiling fixtures if ceiling is wet. The wiring may be damaged.
  • Don't send garments to an ordinary dry cleaner. Improper cleaning may set smoke odor.

Have Smoke or Fire Damage? Call (508) 676-9100

Other News

View Recent Posts